Glow in the dark PLA

 Expensive stuff from MBI - but sooo nice. Prints well and nice glow!
0.2mm layer at 30mm/s 110mm/s infill

Bronzefill adventures

 This guy is 40mm high

 polished and aged with "modern masters" green and blue ageing solution

 Polished with a steel brush rotary tool

 Rosetta probe body with dish and philae lander

 all that support is really not needed

solar panels in bronze got too thin

Army green MB PLA

Nice stuff and easy to print with..

Standard 5th gen replicator settings work super...

Pink MB PLA

 Wii wheel for my daughter...

Nice stuff with good detail.  I think it degrades to black over time at 220C...

More Ninjaflex on the 5th gen

 Black Ninjaflex now finally stable

 Various layer heights - main issue was feed friction actually. Now at 210C overhangs and bridging works as well as retraction. The smart extruder is pretty ok for this material i think...

 This is a spool hanger and bearings i printed from thingiverse. Did wonders for stability. It seems NF and Woodfill has too much friction for the stock feed tube and drawer setup.

Setup that is current favorite :

{
    "comment" : [
     "This is a custom profile for MakerBot Slicer. Editing it will modify your",
      "slice settings. For documentation on MakerBot Slicer parameters, see here:",
      "http://www.makerbot.com/support/makerware/documentation/slicer"
    ],
    "version":"3.0.0",

    "layerHeightMinimum": 0.12,
    "layerHeightMaximum": 0.27,

    "layerHeight": 0.20,
    "layerWidthMaximum": 0.4,
    "layerWidthMinimum": 0.4,
    "layerWidthRatio": 1.481481,
    "bedZOffset": 0,
    "startX": -110.4,
    "startY": -74.0,
    "startZ": 0,
    "defaultExtruder": 0,

    "rapidMoveFeedRateXY": 150,
    "rapidMoveFeedRateZ": 23,

    "minLayerDuration": 5.0,
    "minSpeedMultiplier": 0.3,

    "doDynamicSpeed": false,
    "dynamicSpeedCurvatureThreshold": 15,
    "dynamicSpeedDetectionWindow": 3.0,
    "dynamicSpeedSlowdownRatio": 0.3,
    "doDynamicSpeedGradually": true,
    "dynamicSpeedTransitionWindow": 6.0,
    "dynamicSpeedTransitionShape": 0.4,
    "doDynamicSpeedOutermostShell" : true,
    "doDynamicSpeedInteriorShells" : false,

    "doSplitLongMoves": true,
    "splitMinimumDistance": 0.4,

    "extruderTemp0": 230,
    "extruderTemp1": 215,
    "platformTemp": 0,

    "numberOfShells": 3,
    "infillShellSpacingMultiplier": 0.7,
    "insetDistanceMultiplier": 1.0,

    "roofThickness": 1.2,
    "roofLayerCount_disabled": 4,
    "roofAnchorMargin": 0.65,
    "floorThickness": 1.2,
    "floorLayerCount_disabled": 4,

    "coarseness": 0.00001,

    "sparseInfillPattern": "hexagonal",
    "infillDensity": 0.33,
    "infillOrientationOffset": 0,
    "infillOrientationInterval": 90,
    "infillOrientationRange": 90,

    "gridSpacingMultiplier": 0.99,
    "solidFillOrientationOffset" : 0,
    "solidFillOrientationInterval": 90,
    "solidFillOrientationRange": 90,

    "doBacklashCompensation": false,
    "backlashEpsilon": 0.05,
    "backlashFeedback": 0.9,
    "backlashX": 0.0,
    "backlashY": 0.09,

    "doBridging": true,
    "bridgeAnchorMinimumLength": 0.8,
    "bridgeAnchorWidth": 0.8,
    "bridgeMaximumLength": 80.0,
    "bridgeSpacingMultiplier": 1.0,

    "doExternalSpurs": true,
    "doInternalSpurs": false,
    "maxSpurWidth": 0.5,
    "minSpurLength": 0.34,
    "minSpurWidth": 0.12,
    "spurOverlap": 0.001,

    "doRaft": false,
    "defaultRaftMaterial": 0,
    "doMixedRaft": false,
    "raftAligned": true,
    "raftBaseAngle": 0,
    "raftBaseDensity": 0.7,
    "raftBaseLayers": 1,
    "raftBaseRunGapRatio": 0.8,
    "raftBaseRunLength": 15.0,
    "raftBaseThickness": 0.3,
    "raftBaseWidth": 2.5,
    "raftInterfaceAngle": 45,
    "raftInterfaceDensity": 0.3,
    "raftInterfaceLayers": 2,
    "raftInterfaceThickness": 0.27,
    "raftInterfaceWidth": 0.4,
    "raftModelSpacing": 0.29,
    "raftOutset": 4,
    "raftSurfaceAngle": 0,
    "raftSurfaceLayers": 2,
    "raftSurfaceThickness": 0.27,
    "raftSurfaceShells": 2,
    "raftSurfaceShellSpacingMultiplier": 0.7,

    "doPurgeWall": false,
    "purgeWallModelOffset" : 2.0,
    "purgeWallSpacing" : 1.0,
    "purgeWallWidth" : 0.5,
    "purgeWallBasePatternWidth" : 8.0,
    "purgeWallBaseFilamentWidth" : 2.0,
    "purgeWallBasePatternLength" : 10.0,
    "purgeWallPatternWidth" :  2.0,
    "purgeBucketSide" :  4.0,
    "purgeWallXLength" : 30,

    "anchorWidth": 2.0,
    "anchorExtrusionAmount": 5.0,
    "anchorExtrusionSpeed": 2.0,

    "doSupport": false,
    "defaultSupportMaterial": 0,
    "doMixedSupport": false,
    "doSupportUnderBridges": false,
    "supportAligned": true,
    "supportLeakyConnections": true,
    "supportDensity": 0.2,
    "supportExtraDistance": 0.5,
    "supportAngle": 68.0,
    "supportModelSpacing": 0.4,
    "supportExcessive": false,

    "doFanCommand": false,
    "fanLayer": 1,
    "weightedFanCommand": -1,
    "doFanModulation": true,
    "fanModulationWindow": 0.1,
    "fanModulationThreshold": 0.5,

    "doPrintProgress": true,

    "startGcode": "",
    "endGcode": "",

    "commentClose": "",
    "commentOpen": ";",

    "extruderProfiles": [
        {
            "bridgesExtrusionProfile": "bridges",
            "feedDiameter": 1.75,
            "feedstockMultiplier": 0.85,
            "firstLayerExtrusionProfile": "firstlayer",
            "firstLayerRaftExtrusionProfile": "firstlayerraft",
            "infillsExtrusionProfile": "infill",
            "insetsExtrusionProfile": "insets",
            "nozzleDiameter": 0.4,
            "outlinesExtrusionProfile": "outlines",
            "raftBaseExtrusionProfile": "raftbase",
            "restartExtraDistance": 0.1,
            "retractDistance": 1.0,
            "retractRate": 10,
            "retractDistance2": 1.0,
            "retractRate2": 50,
        "restartRate": 50,
            "toolchangeRetractDistance" : 19.0,
            "toolchangeRetractRate" : 6.0,
            "toolchangeRestartDistance" : 18.5,
            "toolchangeRestartRate" : 6.0
        },
        {
            "bridgesExtrusionProfile": "bridges",
            "feedDiameter": 1.77,
            "feedstockMultiplier": 0.75,
            "firstLayerExtrusionProfile": "firstlayer",
            "firstLayerRaftExtrusionProfile": "firstlayerraft",
            "infillsExtrusionProfile": "infill",
            "insetsExtrusionProfile": "insets",
            "nozzleDiameter": 0.4,
            "outlinesExtrusionProfile": "outlines",
            "raftBaseExtrusionProfile": "raftbase",
            "restartExtraDistance": 0,
            "retractDistance": 1.0,
            "retractRate": 10,
            "retractDistance2": 1.0,
            "retractRate2": 50,
        "restartRate": 50,
            "toolchangeRetractDistance" : 19.0,
            "toolchangeRetractRate" : 6.0,
            "toolchangeRestartDistance" : 18.5,
            "toolchangeRestartRate" : 6.0
        }
    ],
    "extrusionProfiles": {
        "bridges": {
            "feedrate": 30,
            "temperature_disabled": 230.0
        },
        "firstlayer": {
            "feedrate": 5,
            "temperature_disabled": 230.0
        },
        "firstlayerraft": {
            "feedrate": 30,
            "temperature_disabled": 230.0
        },
        "infill": {
            "feedrate": 30,
            "temperature_disabled": 230.0
        },
        "insets": {
            "feedrate": 30,
            "temperature_disabled": 230.0
        },
        "outlines": {
            "feedrate": 10,
            "temperature_disabled": 230.0
        },
        "raftbase": {
            "feedrate": 10,
            "temperature_disabled": 230.0
        }
    }
}